Rotor Controller

Just bought a lama 5 r/c helicopter, the rotors dont spin, is there something i should be doing?

plugged the battery in, charged it up, charged up the controller.
The trim moves on the chopper but nuthin else seems to work.

check for ground or loose wires in the aircraft

Blonder-Tongue PM-1 Rotator/Rotor Control – Prism-Matic $9.99

1950’s “Alliance tenna-rotor” Bakelite Antenna Rotor Control Box $10.00

Aluminum Tail Rotor Pitch Control Slider Set: B400 $11.99

Tail Rotor Control Arm Set: 500, 550E, 600 $6.99

Radio Shack Antenna Rotor- CONTROLLER UNIT ONLY- Archer Model 15-1225A / 15-1225 $15.00

Tail Rotor Control Set 450 Sport $7.99

FOR SALE IS AN ALLIANCE TENNA ROTOR AND TENNA CONTROL BOX MODEL U100 $45.00

Align Metal Tail Rotor Control Arm Set H25092 – Trex 250 $7.99

ALIGN Metal Tail Rotor Control Arm Set H60186A – T-REX 500/550E/600E/600N $10.99

radio shack tv rotor/control box/cable $29.99

ALIGN Metal Tail Rotor Control Arm Set H50165 – T-REX 500E PRO/ 500EFL PRO $10.99

Harley Davidson handlebar control kit 5/8″ bore master cyl. single rotor chopper $149.99

5 ANTENNA ROTOR CONTROL BOXES $10.00

Hirobo Shuttle ZXX RC Helicopter Rotor Blades radio control parts $5.50

AMPLIFIED TV ANTENNA HDTV HD VHF UHF OUTDOOR /w Remote Control Rotor Digital NR $34.99

Vintage Radio Antenna Rotor Control Box Alliance 65 Watt Rotator Unit $5.00

Vintage Archerotor Antenna Rotor Control Box Model 15-1225A $14.99

AMPLIFIED TV ANTENNA HDTV HD VHF UHF OUTDOOR /w Remote Control Rotor Digital NR $34.99

Megan Racing used rear control arms, rx7, rotary, 13b,2 rotor, mazda, toe links $98.00

CD 45 II Anenna Roror With CDE Control Box & 100′ Rotor Wire $100.00

Dell 3100Cn 160K98501K Rotor Control Board M5594 $52.00

Metal Tail Rotor Control Arm: All 250 $7.99

Metal Rotor Control Arm Set 450 $7.99

Chanel Master Antenna Rotor Controller for Outdoor Antenna $7.50

01-05 VW PASSAT ENGINE CRADLE+CONTROL ARMS, STRUTS,SWAY BARS SPINDLES+RIMS+TIRES $99.00

ART DECO STYLE TRIO ROTOR ANTENNA CONTROL SWIRL BAKELITE PLASTIC $9.99

F+R Rotors Ceramic Pads for E420 non-Stability Control $224.82

F+R Rotors & Ceramic Pads for E420 Stability Control $208.45

NEW RADIO SHACK 15-1245 OUTDOOR ANTENNA ROTATOR ROTOR & CONTROL BOX HD TV HAM CB $59.99

ALIGN T-REX 700N Metal Tail Rotor Control Arm Set RC Helicopters HN7086A $16.90

HAM Radio Antenna Rotor Controller rotator 3 wire Amateur Philips ECG Nice $18.85

ALIGN TREX 500E Tail Rotor Control Arm Set H60044 $0.99

VINTAGE AIRSTREAM TV ANTENNA ROTOR CONTROL TRAVEL TRAILER AVION CAMPER RV EUC $49.99

Alliance HD-73 Antenna Rotor Rotator with Dual Speed Control Box HF Ham Radio $36.00

CDE CD44 Ham-II or Ham III Rotor Control Box Only $70.00

Align 700N/E Metal Tail Rotor Control Arm Set HN7086A $15.50

Align Radio Control Helicopter Trex 450 Tail Rotor Blade New HS1208 New In Pack $9.49

How You Can Use Motor Controls?

Motor controls are a device that controls the position, velocity, and torque of a mechanical drive. It is designed for motion controls of electrical motors. It has automatic and manual transmissions for starting and stopping the motor, and choosing and regulating the speed.

 It is also expected to choose either forward or reverse rotation, protect against overloads and faults, and regulate the torque. Each electric motor is equipped with controller which has varying functions and features.

 Motor controls can also help protect larger motors from overload or from having an over current condition. This is done with a protective overload relay or temperature sensing relay. Fuses and circuit breakers are also useful for over current protection. There are automatic motor controllers that come with limit switches to protect the driven machinery.

 Certain complex motor controllers are used to control the speed and torque of connected motors. In a closed loop control system, a controller produces precise positioning of at motor in a numerically-governed lathe.

 The motor controller accurately positions the cutting tool based on the pre-programmed profile. Likewise, it compensates for different load conditions and disturbing forces to help keep the tool’s position.

 Motor controllers are based on what they con do. There are manual motor control, automatic motor control and remote motor control. Depending on the manufacturer, motor controls may only have a start and stop button. But there are many controllers that control a motor with many features.

 An electric motor control can be classified according to the type of motor to be driven or controlled. These are servo motion control, step motors, alternating current or AC, direct current or DC-brush and brushless DC or permanent magnet.

 Servo is a generic term for an automatic control system. In practical applications, it is a mechanism that you can set and forget. It adjusts itself during continuous operation through feedback.

 Servo motion controllers are part of a closed loop control system for electric motors. The motors used in servo control are normally DC. The servo motor controls use a sensor to detect motor position and speed.

 A stepper motion controller is viewed as an electric motor without the commutations. They are composed of permanent magnets on a rotating shaft called a rotor. The electromagnets in the stationary area are called stator, which surround the motor.

 All commutations must be handled by the stepper motion controller, which comes in two classifications. These are permanent magnet and variable reluctance. The permanent magnet motors have the inclination to cog when you twist the rotor. The variable reluctance motor spins freely.

 AC motors are affordable to build and operate. They are also reliable because they run from standard line power. The magnetic fields of this motor control are generated using coils on the stator and rotor. The field movement happens naturally in the stator because of the alternating nature of input power.

DC motor controls convert electrical power into mechanical. Permanent magnet DC converts electrical energy into mechanical energy through the interaction of two magnetic fields—one is produced by a permanent magnet assembly, while the other is produced by an electrical current flowing.

About the Author

Rudy Silva is a nutritionist that gives you more free tips and information on heartburn at: http://www.acidreflux-relief.info or at http://www.acidheartburnreflux.com Pick up his revealing free constipation report by signing up for his weekly natural remedies newsletter at: http://www.natural-remedies-thatwork.com